Seawall Construction and Bulkhead Construction

docksaver™ Marine Dock Bumpers

docksaver close-up "The best boat and dock saver protection on the market"

Strong, pliable and constructed of attractive UV-inhibited white polyethylene skin and resilient closed-cell foam to combine for ultimate impact and cushion performance. docksaver™ Dock Bumpers are maintenance-free, non-marring and resistant to gas, oil and salt water. Outer flanges attach to the dock surface with attractive white polyethylene pre-drilled strips and mounting hardware (screws are included). Our versatile dock bumpers are designed for both horizontal and vertical installations. A variety of sizes are available--up to 6' in length. Say no to other types of rubber, vinyl and canvas cloth dock bumpers and YES! to docksaver™ Dock Bumpers by Lee Composites.

Each docksaver™ Dock Bumper is supplied one per box with pre-drilled attachment strips and screws. Our dock bumpers carry a one (1) year limited warranty from the date of purchase to the original consumer purchaser (see below for specific warranty information).

The docksaver™ system should never be used for stepping purposes, but for protecting the dock and boat during normal use.

Easy to Mount!

Mount either horizontally or vertically with the enclose pre-drilled attachment strips and screws
Spot tack the flange above the bumper to the dock
Drive screws through the attachment strip and flange into the dock
Cut away the excess flange
You're done!

Limited Warranty
Lee Composites docksaver™ Dock Bumpers carry a one (1) year limited warranty from the date of purchase to the original consumer purchaser. The warranty covers defection in materials and workmanship under normal use and service, but excludes defects caused by:

Improper installation or use not conforming to instructions of Lee Composites
Repairs and modification
Damage, impact, misuse and abuse by other normal use and service and acts of God.

docksaver™ Dock Bumper Size Chart
Model	Width	Depth	Length
DBR 422	4 in.	2 in.	2 ft.
DBR 423	4 in.	2 in.	3 ft.
DBR 424	4 in.	2 in.	4 ft.
DBR 425	4 in.	2 in.	5 ft.
DBR 426	4 in.	2 in.	6 ft.
DBR 632	6 in.	3 in.	2 ft.
DBR 633	6 in.	3 in.	3 ft.
DBR 634	6 in.	3 in.	4 ft.
DBR 635	6 in.	3 in.	5 ft.
DBR 636	6 in.	3 in.	6 ft.
DBS 442	4 in.	4 in.	2 ft.
DBS 443	4 in.	4 in.	3 ft.
DBS 444	4 in.	4 in.	4 ft.
DBS 445	4 in.	4 in.	5 ft.
DBS 446	4 in.	4 in.	6 ft.
DBS 542	5 in.	4 in.	2 ft.
DBS 543	5 in.	4 in.	3 ft.
DBS 544	5 in.	4 in.	4 ft.
DBS 545	5 in.	4 in.	5 ft.
DBS 546	5 in.	4 in.	6 ft.
DBS 642	6 in.	4 in.	2 ft.
DBS 643	6 in.	4 in.	3 ft.
DBS 644	6 in.	4 in.	4 ft.
DBS 645	6 in.	4 in.	5 ft.
DBS 646	6 in.	4 in.	6 ft.
DBS 662	6 in.	6 in.	2 ft.
DBS 663	6 in.	6 in.	3 ft.
DBS 664	6 in.	6 in.	4 ft.
DBS 665	6 in.	6 in.	5 ft.
DBS 666	6 in.	6 in.	6 ft.
DBS 1242	12 in.	4 in.	2 ft.
DBS 1262	12 in.	6 in.	2 ft.
Note: Other sizes available upon request. 3" flange all around the bumper. Predrilled polyethylene attachment strips and SS316 screws included. FOB: Spring, Texas

docksaver™ Corner Bumper Size Chart
Model	Width	Depth	Length
CBRD 631	6 in.	3 in.	1 ft.
CBRD 632	6 in.	3 in.	2 ft.
CBS 641	6 in.	4 in.	1 ft.
CBS 642	6 in.	4 in.	2 ft.
CBS 643	6 in.	4 in.	3 ft.
CBS 1241	12 in.	4 in.	1 ft.
CBS 1242	12 in.	4 in.	2 ft.
CBSD 641	6 in.	4 in.	1 ft.
CBSD 642	6 in.	4 in.	2 ft.
Note: Other sizes available upon request. CBS is a 1-piece bumper; CBD & CBRD are 2-piece bumpers. 3" flange all around the bumper. Predrilled polyethylene attachment strips and SS316 screws included. FOB: Spring, Texas

dock_bumper
Model DBR
(half round design)

docksaver
Model DBS
(square or rectangular design)

Model CBS
(1 piece)

Model CBRD
(vertical design)

Model CBSD
(vertical design)

Pre-drilled attachment strips
(screws included)

docksaver™

CLOSED CELL FOAM
with a tough vacuum formed POLYETHYLENE SHELL